Metal Detector Manuals: Where to Find Instructions for Every Brand (2026)

Disclosure: Some links in this article are affiliate links. We may earn a commission on qualifying purchases at no extra cost to you.

A missing metal detector manual turns a simple outing into guesswork. That is especially true when you are trying to sort out target ID numbers or ground-balance behavior without the instructions.

This directory covers the official PDF hubs for every major brand — Garrett, Minelab, Nokta, XP, Fisher, Bounty Hunter, Teknetics, White's, and Tesoro. It also lists the support phone or email to request a manual that is no longer online, along with the short procedures owners actually search for.

You will also find a used-buyer checklist for machines that arrive with no paperwork, plus trusted backup archives for discontinued and older detectors.

It is built for anyone who lost the in-box booklet, bought a used detector, or needs one operation explained before the next hunt.

The Fastest Way to Find the Right Manual

Start with the manufacturer-hosted PDF, not a third-party aggregator. First-party pages carry the correct revision, the official support contact, and no ad wall. Third-party archives are useful backups, but they can serve an outdated file or bury the download behind advertising.

For firmware-updatable detectors such as Nokta, XP, and Minelab models, match the manual revision to the installed firmware. A firmware change can alter discrimination, audio, and pairing behavior enough that an older manual leads you wrong.

Quick myth check: If you are hunting for a ground-balance procedure on a Garrett ACE 400, Fisher F22, or Bounty Hunter Tracker IV, stop. These detectors do not have manual ground balance. It is fixed or automatic. The manual will not contain a ground-balance dial because the control does not exist.

Official Manual Directory by Brand

Garrett

Official manuals: Garrett user manual hub covers the ACE 150, 250, 200i, 300i, 400i; AT Pro, AT Max, AT Gold; Pro-Pointer AT and AT Z-Lynk; Axiom; Goldmaster 24K; GTI; ACE Apex, and more. Direct PDFs include the Pro-Pointer AT manual and the original Pro-Pointer manual. Legacy White's manuals are hosted separately at garrett.com/whites-manuals/.

Support: 1-800-527-4011 (US and Canada) or 1-972-494-6151, Monday through Friday 8 a.m. to 4:30 p.m. CST. Email sales@garrett.com.

Most-searched fixes: The ACE 400 uses fixed, factory-set ground balance, despite repeated searches for a GB procedure. To pair a Pro-Pointer AT with Z-Lynk audio, hold the devices within 6 inches of each other with the receiver powered on first. To reset an AT Pro to factory defaults, hold the power button until the detector emits two beeps.

Current Garrett detector: Check current availability on Amazon

Minelab

Official manuals: Minelab product manuals and guides covers Equinox 600, 700, 800, and 900; Vanquish 340, 440, and 540; X-Terra Pro, Elite, 705, Voyager, and Intrepid; CTX 3030; Excalibur II; GPX 4500, 5000, and 6000; GPZ 7000; Gold Monster 1000; Manticore; SDC 2300; and PRO-FIND pinpointers. A US mirror is available at usa.minelab.com/product-manuals, with discontinued products at minelab.com/discontinued-products.

Support: US Customer Care at 1-877-767-6522 or 1-888-949-6522. Email service@minelabamericas.com for service or info@minelabamericas.com for general questions.

Most-searched fixes: Equinox 900 and 800 use a target ID scale of −19 to +99, which differs from the 0–99 Garrett-style VDI. Owners switching brands often hunt for the scale chart. The manual explains Multi-IQ modes and ground-balance options, but it does not include recommended field settings for recovery speed or iron bias.

Current Minelab detector: Check current availability on Amazon

Nokta

Official manuals: Nokta brochures and manuals covers AccuPOINT, The Legend and Legend 2, Simplex New Generation, Score, Double Score, Triple Score, PulseDive, Gold Kruzer, Invenio, Multi Kruzer, Anfibio, and pinpointers. A direct Legend English PDF is also hosted by dealers.

Support: +90 (216) 415 56 86 or info@noktadetectors.com. US service runs through the technical service form; there is no published US phone line.

Most-searched fixes: Legend tone break and tone-region adjustments, the "pump the coil" ground-balance procedure, and wireless headphone pairing. Because firmware updates change behavior, the manual revision must match the installed firmware.

Current Nokta detector: Check current availability on Amazon

XP Metal Detectors

Official manuals: XP user manuals covers DEUS, DEUS II, ORX, WS4 and WS6 Master, GO TERRAIN, and MI-4/MI-6 pinpointers, across multiple languages. Direct DEUS II, DEUS V6, and ORX PDFs are available from the same section.

Support: XP publishes no direct phone or email. You start with the contact form or your original dealer.

Most-searched fixes: Pairing a new coil requires entering the coil serial number into the remote. Pairing the MI-6 pinpointer means holding its button for about 8 seconds; it auto-switches to program 7 on ORX and DEUS. For false signals or no detection, check the ground balance — a common starting value is 90, or 27 on wet beach sand. The controller battery is part number DO88M-WTUBE, 700 mAh, shared with the pinpointer.

Current XP detector: Check current availability on Amazon

Fisher

Official manuals: First Texas manuals page covers F11, F19, F22, F44, F70, F75 and F75 LTD, F-Pulse, Gold Bug and Gold Bug Pro/DP/2, Gemini 3, CZ series, and the 1200/1266 series.

Support: 1-800-685-5050, sales@frsttx.com, or First Texas Products, 1120 Alza Drive, El Paso, TX 79907.

Most-searched fixes: The F22 has no ground balance — it is preset for average ground. The F22 and F44 require AA alkaline batteries only, not heavy-duty or zinc-carbon cells. The F75 uses FASTGRAB auto ground-cancel with a preset starting value of 90. The Gold Bug line needs ground balancing before nugget hunting.

Current Fisher detector: Check current availability on Amazon

Bounty Hunter

Official manuals: First Texas manuals page covers Tracker IV, Quick Silver, Discovery, Land Ranger Pro, Time Ranger, Gold Digger, Fast Tracker, Junior, and Lone Star.

Support: Shares First Texas channels: 1-800-685-5050, +1 (915) 633-8354, or sales@frsttx.com.

Most-searched fixes: The Tracker IV is a motion detector — the coil must be sweeping to signal a target. It uses automatic preset ground balance, sometimes labeled Ground Trac, and requires two 9 V alkaline batteries. Its single discrimination control toggles DISC, Tone, and All-Metal modes, which confuses owners expecting a notched discrimination system.

Current Bounty Hunter detector: Check current availability on Amazon

Teknetics

Official manuals: First Texas manuals page covers T2, T2 LTD, T2+, Delta 4000, Gamma 6000, Omega 8000 and 8500, Alpha 2000, G2 and G2+, Eurotek and Eurotek Pro, DigiTek, Patriot, and Minuteman.

Support: 1-800-413-4131 or info@frsttx.com.

Most-searched fixes: T2 ground cancellation starts with a phase preset of 90 and uses FASTGRAB via the trigger. A "CAN'T GC" message means metal is present — move to a clear patch and try again. Owners also search for All-Metal versus Discrimination differences and Delta, Alpha, and Omega battery types.

Current Teknetics stock: See what is still in stock on Amazon

White's Electronics — Discontinued 2020

Official manuals: White's suspended operations on June 18, 2020, and Garrett announced acquisition of its trademarks, intellectual property, and tooling on October 16, 2020. Garrett now hosts legacy manuals at garrett.com/whites-manuals/, including 3900D, 4900D, 5900, 6000, Bullseye and Bullseye 2, Classic Series, DFX, GEB, GMT, Goldmaster, MXT, MX Sport, Spectra V3i, XLT, TDI, TM 808, CoinMaster, and Treasuremaster/Treasurepro. The original whiteselectronics.com site is defunct.

Support and repair: Independent shops listed by Garrett include Centreville Electronics at 9437 Main St., Manassas, VA 20110, (800) 547-6911 or (703) 367-7999; and Centreville Electronics NW at 1550 Maple Place, Lebanon, OR 97355, (541) 409-7769.

Most-searched fixes: Used White's machines — especially DFX, XLT, Spectra V3i, MXT, and M6 — are common, and many arrive with no paperwork. Owners should start with the Garrett-hosted PDF, then confirm repair support with an independent shop.

Parts and continuing options: Find remaining White's coils and parts on Amazon

Tesoro — Discontinued 2018

Tesoro Electronics closed permanently in 2018. No manufacturer manual site remains. Manuals for older Tesoro models live in dealer archives and third-party collections, including MetalDetector.com and community download pages. There is no new-unit inventory, so parts and used units are the only route.

Parts and used-market search: Search for Tesoro metal detector parts on Amazon

Quick Fixes for the Three Most Searched Procedures

Garrett Pro-Pointer AT Z-Lynk Pairing

Hold the Pro-Pointer AT Z-Lynk and the MS-3 headphones or WR-1 receiver within 6 inches of each other, with the receiver powered on first. The pointer then links automatically.

XP MI-6 Pinpointer Pairing

Turn on the MI-6, then hold its button for about 8 seconds. It pairs with ORX and DEUS and auto-switches to audio program 7.

Nokta Wireless Headphone or Speaker Pairing

On The Legend and related detectors, power the device on while holding the sensitivity and pairing control together. The exact button combination depends on the firmware revision, so check the manual version matching your installed firmware.

What to Do When You Buy a Used Detector With No Manual

A used machine with missing paperwork is the single most common manual request on detecting forums. Take these steps in order:

1. Download the official first-party PDF from the hub above.
2. If the brand is discontinued, go to the Garrett-hosted White's archive or a dealer/community archive for Tesoro.
3. Before you bid or pay, confirm what shipped in the box: coil, battery holder or pack, charger, arm cuff, and any wireless accessories. Missing parts are often harder to replace than the manual.

For discontinued White's machines, owners tend to land on modern equivalents instead of hunting for scarce parts. MXT and M6 users often move to a current Minelab multi-frequency machine such as the X-Terra Pro or Equinox line. DFX and Spectra V3i owners also find a similar experience in the current Minelab lineup. TDI owners who want pulse induction can look at Garrett's pulse-induction platform.

Trusted Third-Party Manual Archives

Use these when the official page fails or you need a truly old manual.

• DetectorProspector Downloads — a curated archive with discontinued models and a clear fair-use policy. Best community-run source by far.
• Internet Archive — best for pre-2010 or discontinued machines such as White's Coinmaster and Compass models.
• Dealer $0-download pages — High Plains Prospectors, Serious Detecting, Colonial Metal Detectors, and Kellyco host free digital manuals, though some require adding a $0 item to a cart.

Caution: ManualsLib and similar aggregators often rank directly above the manufacturer. They can carry the wrong revision or wrap the download in heavy advertising. Check the first-party page before you settle for a mirror.

Frequently Asked Questions

Conclusion

A missing manual does not have to end a hunt. The official PDF is almost always available from the manufacturer, and the support phone or contact form is the fallback when it is not. Start with the first-party hub, match the manual to your installed firmware, and use third-party archives only when the brand is discontinued or the official page disappears.

For the most common operational searches, the answer is often simpler than a full manual: ACE 400 and Fisher F22 have no manual ground balance, Tracker IV must sweep to detect, and XP or Garrett wireless pairing is a short, repeatable procedure.

For more background on how target ID scales and discrimination work, see Metal Detector Discrimination and Target ID Explained. For realistic expectations about detector depth, read How Deep Can a Metal Detector Go?. If you want a deeper look at XP's wireless platform, start with the XP Deus review.