Disclosure: Some links in this article are affiliate links. We may earn a commission on qualifying purchases at no extra cost to you.
Lead and brass relics — musket balls, minie balls, brass buttons, buckles, and uniform hardware — sit in a conductivity range that most entry-level detectors treat as trash. If you've ever dug a shotgun shell head at a colonial cellar hole, you know the frustration. But the right machine, tuned correctly, can separate deep lead and brass from the surrounding iron and foil. Our guide to target ID and discrimination breaks down how these numbers work; here we apply that knowledge to the specific challenge of low-to-mid conductor relic hunting.
This isn't a generic "best relic detector" list that lumps coin shooting with relic hunting. Lead and brass are fundamentally different from the high-conductivity clad coins most buying guides optimize for. They ring low on the target ID scale, often overlapping with aluminum trash and foil. Iron masking is the single biggest obstacle at real relic sites — old camps, cellar holes, and battlefields are nail-infested. The machines below excel not because they go deepest in air tests, but because they handle iron and reveal low conductors in the same sweep.
We've tested and compared these detectors across every price tier, from an affordable weatherproof single-frequency unit to a premium flagship with a 2D target ID map. Each pick is matched to a specific use case: budget relic hunting, deep brass in mineralized soil, extreme iron separation, or all-around versatility. No filler, no gold-prospecting pulse induction machines padded onto the list.
If you hunt leads, three-ringers, brass buttons, or colonial coppers, this guide is for you. Whether you're a beginner wanting to avoid digging a bag of iron or a veteran looking for a sniper coil to pull small targets from hunted-out sites, you'll find a detector here that fits your ground and your budget.
Quick Picks — Top Metal Detectors for Lead & Brass Relics
| Category | Detector | Price Tier | Why It's Here |
|---|---|---|---|
| Best Overall | Nokta The Legend 2 | $$ | SMF + dedicated Relic mode, 99-ID scale, two coils including a sniper |
| Best Premium Depth | Minelab Manticore | $$$ | Multi-IQ+ engine, 2D Target ID map, unmatched stability on deep brass |
| Best Lightweight Wireless | XP Deus II | $$$ | FMF multi-frequency, fast recovery, 5-year warranty, 20 m waterproof |
| Best All-Around Value | Minelab Equinox 900 | $$ | Multi-IQ, 119 target ID, complete package with two coils |
| Best Mid-Range Single-Frequency | Garrett AT Max | $$ | 13.6 kHz, True All Metal mode, Iron Audio, submersible |
| Best Budget Multi-Frequency | Garrett ACE Apex | $ | Multi-Flex, Iron Audio and 8 Iron Volume steps at a bargain |
| Best Budget Relic Specialist | Minelab X-Terra Pro | $ | 5 kHz for deep brass, switchable single freq, IP68 |
| Best Turn-On-And-Go Budget | Nokta Simplex Ultra | $ | 15 kHz, waterproof, All-Metal mode, easy to learn |
| Best Under $250 | Fisher F22 | $ | FeTone iron audio, Artifact mode, battle-tested budget pick |
What Makes a Great Metal Detector for Lead & Brass Relics?
Lead and brass are non-ferrous but occupy the low-to-mid conductivity range. Lead sits at the very bottom (even below some steel), while brass — a copper-zinc alloy — reads mid-scale, closer to aluminum and foil. This has real consequences for how a detector should be set up and what features matter most.
Low-Conductor Sensitivity and Target Separation
A great relic detector must be able to lock onto small, low-conductivity targets even when they sit inches from an iron nail. This is where target separation and recovery speed matter more than raw depth. Look for machines with fast recovery speeds and small coil options — a 6″ or 8″×5.5″ "sniper" coil dramatically improves unmasking of lead and brass next to nails.
Iron Audio and Iron Discrimination
At any relic site, iron nail density is the best indicator of human activity. Iron audio lets you hear ferrous targets without rejecting them entirely — you can locate the nail bed while still catching the non-ferrous lead and brass around it. Detectors with adjustable iron volume (like Garrett's Iron Audio or Fisher's FeTone) give you more control than a simple on/off notch.
Frequency Behavior: Single vs. Simultaneous Multi-Frequency
Lower frequencies (4–8 kHz) push deeper on larger brass and high-conductivity relics. Higher frequencies (15–20+ kHz) light up small lead and low-conductor brass. Simultaneous multi-frequency (SMF) machines — Minelab Multi-IQ/Multi-IQ+, Nokta SMF, XP FMF — transmit across the spectrum at once, so you don't have to choose between deep brass and small lead. If you hunt ground with mixed targets and iron, SMF is the biggest upgrade you can buy.
Ground Balance and Mineralization
Relic sites are often in mineralized soil — old farm fields, iron-rich clay, and battlefields. Manual or automatic ground balance is essential for maintaining depth in these conditions. Detectors without adjustable ground balance (like the Fisher F22) work fine in mild soil but lose performance in hot ground. For more on how soil type affects depth, see our depth explained by soil type guide.
Coil Choice
The stock coil matters. Large DD coils cover ground and find deep targets, but small elliptical coils separate better in trash. Many of the picks below ship with two coils, letting you run a big coil for coverage and a sniper coil for tight iron.
#1 Nokta The Legend 2 — Best Overall for Lead & Brass Relics
The Nokta The Legend 2 takes everything that made the original Legend a relic-hunting favorite and refines it for exactly the targets we care about: lead and brass. It's the best combination of price, flexibility, and iron-handling capability on the market.
Specs / Features
- Simultaneous Multi-Frequency (SMF) with 3 multi modes plus 5 single frequencies (4, 10, 15, 20, 40 kHz)
- New dedicated Relic mode purpose-built for iron-heavy, mineralized ground
- Expanded 99-point Target ID scale (up from 60), visible in pinpoint mode
- FerroCheck ferrous-content meter for flagging iron/trash before digging
- 7 harmonic audio tones with adjustable pitch (100 Hz – 1200 Hz)
- IP68 waterproof to 5 m (16 ft); 2.6 lbs; 6700 mAh Li-ion battery (8–20 hr runtime)
- Ships with two coils: LD28 11″ DD and LD21 8″×5.5″ DD; Bluetooth aptX LL headphones; 3-year warranty
Pros
- Dedicated Relic mode and FerroCheck are purpose-built for iron-infested sites
- Two coils included; the 8″×5.5″ sniper coil excels at pulling low conductors from nails
- High-resolution 99-point ID and 7-tone audio give precise target information
- Excellent value compared to flagship SMF machines
Cons
- Menus can feel deep for beginners
- Battery life varies widely (8–20 hr) depending on settings
Verdict: If you want one detector that handles both deep brass and tiny lead without breaking $1,000, the Legend 2 is the obvious choice. The included sniper coil alone is worth the upgrade over the original.
Perfect for: Relic hunters who want SMF, a dedicated relic mode, and a complete package at a mid-range price.
#2 Minelab Manticore — Best Premium Depth for Deep Brass & Large Relics
The Manticore is the most advanced detector on this list, built for hunters who chase deep brass, large coppers, and high-conductivity relics in trashy, mineralized ground. Its Multi-IQ+ engine delivers more transmit power than any Equinox, and the 2D Target ID map gives you a visual signature of every target.
Specs / Features
- Multi-IQ+ simultaneous multi-frequency — up to 50% more power than Equinox series
- 2D Target ID map (100 conductive × 50 ferrous segments) with rich audio
- 10 search modes (All-Terrain, Beach, Goldfield)
- IP68 waterproof to 5 m (16 ft); ships with M11 11″ DD coil and ML105 headphones
- Battery runtime up to 10 hours (noted trade-off vs. Equinox)
Pros
- Unmatched target ID stability and depth on deep conductive relics
- 2D map helps identify deep brass vs. iron falses visually
- Excellent in mineralized soil and saltwater beaches
- 3-year warranty
Cons
- Expensive; heavier than most competitors
- Steeper learning curve; deeper menu system
- ~10-hour battery life is short for all-day hunts
Verdict: If you hunt large brass buckles, sword scabbards, or deep silver, the Manticore pays for itself with its ability to separate high conductors from adjacent iron. For small lead alone, the Equinox 900 or Legend 2 may be more than enough.
Perfect for: Serious relic hunters who prioritize maximum depth on large conductive targets and want the best target ID visualization available.
#3 XP Deus II — Best Lightweight Wireless for Extreme Iron
The XP Deus II is the lightest, most configurable flagship here. Its Fast Multi Frequency (FMF) spans 4–45 kHz, and the dedicated Relic program combined with best-in-class recovery speed makes it a nightmare for iron-infested sites. The fully wireless design — coil, remote, headphones — gives you total freedom.
Specs / Features
- FMF simultaneous multi-frequency with 12 SMF programs; 49 selectable single frequencies from 4.08–45.45 kHz
- Dedicated Relic program
- Best-in-class recovery speed for extreme trash
- IP68 waterproof to 20 m (66 ft) — deepest-rated general-purpose detector
- Weighs from ~750 g with 9″ coil; 5-year warranty
- Wireless coil/remote/headphones; optional HF2 9.5″×5″ coil for small iron-side targets
Pros
- Lightest flagship detector on the market
- 20 m waterproof rating; 5-year warranty
- Fastest recovery speed — exceptional target separation
- Modular wireless system; add headphones or pinpointer as needed
Cons
- Learning curve on the menu system is steep
- Price varies depending on configuration
- Coil battery management requires attention
Verdict: The Deus II is the choice for hunters who chase lead minie balls and small brass buttons out of nail-infested cellar holes. Its recovery speed and light weight let you swing all day without fatigue, and the Relic program is tuned exactly for our targets. If you already own XP detectors, the MI-6 pinpointer pairs seamlessly.
Perfect for: Relic hunters who demand lightweight, extreme iron separation, and the deepest waterproof rating in the class.
#4 Minelab Equinox 900 — Best All-Around Value for Lead & Brass
The Equinox 900 is the proven do-everything machine that relic hunters have trusted since the original Equinox series. It delivers Multi-IQ simultaneous multi-frequency, a high-resolution 119-segment target ID, and comes with two coils — making it arguably the most complete package for the money.
Specs / Features
- Multi-IQ simultaneous multi-frequency; 6 single frequencies (4, 5, 10, 15, 20, 40 kHz)
- 119 high-resolution Target ID; Recovery Speed and Iron Bias controls
- 4 detect modes (Park, Field, Beach, Gold) with 2 custom profiles each
- IP68 waterproof to 5 m (16 ft); 2.8 lbs; carbon-fiber shaft
- Ships with EQX 11″ and 6″ DD coils; wireless headphones
Pros
- Proven Multi-IQ platform with excellent low-conductor sensitivity
- 119 target ID segments and adjustable recovery speed/iron bias
- Two coils included — 11″ for depth, 6″ for trashy iron
- 3-year warranty; comfortable 3-piece carbon shaft
Cons
- Slightly heavier than Deus II; no dedicated Relic mode (though Field mode works well)
- Not as deep on large brass as Manticore
Verdict: The Equinox 900 remains the most versatile mid-premium detector. Its Field mode with Recovery Speed 3 is a favorite among relic hunters for pulling deep whisper-thin lead and brass from hunted-out fields. For most lead and brass hunters, it does everything you need at a price below the true flagships.
Perfect for: All-around hunters who want proven Multi-IQ performance with two coils and no compromises on beach, field, or park.
#5 Garrett AT Max — Best Mid-Range Single-Frequency for Brass Relics
The Garrett AT Max is a blue-collar workhorse with a reputation built on finding large brass and silver in farm fields. Its 13.6 kHz frequency is a deliberate trade: slightly less sensitivity to tiny low conductors, but more depth on mid-to-large brass and silver. The True All Metal mode punches through nails to deep targets.
Specs / Features
- Single-frequency VLF at 13.6 kHz (lower than AT Pro's 15 kHz)
- True All Metal mode for maximum depth; Iron Audio
- 0–99 digital Target ID (44 segments); 175-point ground balance + Auto GB Window
- Built-in Z-Lynk wireless (MS-3 headphones included)
- Fully submersible to 10 ft (3 m); 3.03 lbs; made in USA; 3-year warranty
Pros
- Lower frequency drives depth on large brass, silver, and high-conductivity relics
- True All Metal mode is praised for punching through nails
- Fully submersible, Z-Lynk wireless built in
- Made in USA, reliable, parts easy to find
Cons
- Single-frequency only — no simultaneous multi-frequency
- Heavier than modern SMF machines
- No backlit screen; smaller display than competitors
Verdict: If you love large brass buckles, sword hardware, or big silver, and you want a proven, waterproof, made-in-USA detector without paying for SMF, the AT Max is a solid choice. Its True All Metal mode finds deep targets that discrimination-based machines miss.
Perfect for: Hunters who prefer a simple, deep-seeking single-frequency detector for large brass relics and who don't need the complexity of SMF.
#6 Garrett ACE Apex — Best Budget Multi-Frequency for Relic Hunting
The Garrett ACE Apex brings simultaneous multi-frequency (Multi-Flex) to a price point that used to be single-frequency territory. Its Iron Audio and 8-step Iron Volume control give you more iron information than any other detector under $500, and the dedicated Relics mode is a real asset.
Specs / Features
- Multi-Flex: 4 single frequencies (5, 10, 15, 20 kHz) + Multi-Frequency + Multi-Salt modes
- 6 detection modes incl. dedicated Relics mode
- Iron Audio with 8-level Iron Volume; 5-tone audio
- 175-point high-resolution ground balance; 20 pixels notch discrimination
- Ships with 6″×11″ DD Viper coil; built-in Z-Lynk wireless; ~2.5 lbs; ~15 hr battery
- Weatherproof (not fully submersible); made in USA; 3-year warranty
Pros
- True multi-frequency capability at a budget price
- Iron Audio + adjustable Iron Volume — rare at this price
- Dedicated Relics mode and 5 kHz single frequency for brass depth
- Narrow 6″×11″ coil improves separation in trash
Cons
- Not as deep as Legend/Equinox in demanding ground
- Weatherproof only, not submersible
Verdict: The Apex is the best entry point for a budget-limited new relic hunter. It delivers multi-frequency advantages without the flagship price, and its iron control is unmatched in its class. If you expect to hunt creeks or beaches, look elsewhere.
Perfect for: Beginners who want multi-frequency and iron audio on a tight budget, hunting fields and parks.
#7 Minelab X-Terra Pro — Best Budget Relic Specialist (Switchable Frequency)
The Minelab X-Terra Pro is a single-frequency machine with a trick: PRO-SWITCH lets you choose between 5, 8, 10, or 15 kHz. For relic hunting, the 5 kHz option drives depth on large brass and high conductors, while 15 kHz is better for small lead. It's IP68 waterproof to 5 m and accepts all Equinox coils.
Specs / Features
- PRO-SWITCH selectable single-frequency: 5, 8, 10, 15 kHz (Beach fixed at 8 kHz)
- Park, Field, Beach modes; 30 discrimination segments; pinpoint; vibration
- IP68 waterproof to 5 m (16 ft); 2.9 lbs; ships with V12X 12″×9″ DD coil
- Compatible with all Equinox coils; up to 3-year warranty
Pros
- 5 kHz frequency gives strong depth on large brass, buttons, and belt hardware
- Fully waterproof to 5 m — rare at this price point
- Compatible with Equinox coil ecosystem (6″ sniper, 15″ depth)
- Simple to operate; vibration for underwater use
Cons
- Single-frequency only — you must choose between deep brass and small lead
- No simultaneous multi-frequency for saltwater stability
Verdict: The X-Terra Pro is the best budget choice for a relic-focused buyer who wants switchable frequency without paying for SMF. Its 5 kHz mode excels on brass buttons and large copper, and the waterproof rating makes it versatile for creek beds and wet sites.
Perfect for: Budget hunters who know their targets and want frequency control plus waterproofing.
#8 Nokta Simplex Ultra — Best Turn-On-And-Go Budget Waterproof Machine
The Simplex Ultra is the evolutionary budget king. With a single 15 kHz frequency, it strikes a sensible middle ground for mixed lead/brass targets. It's fully waterproof, easy to learn, and the All-Metal mode doesn't filter out low-conductor relics.
Specs / Features
- Single frequency 15 kHz; 6 search modes: Field, Park, 4-Tone, 99-Tone, Beach, All Metal
- 01–99 Target ID; notch discrimination; 30 sensitivity levels; Iron Off; Ground Suppressor
- IP68 waterproof to 5 m (16 ft); 2.6 lbs; carbon-fiber shaft
- Bluetooth (BT/WHP models); firmware updatable; 3-year warranty
Pros
- Fully waterproof and well-built for the price
- 15 kHz is a good compromise for lead and brass
- All-Metal mode preserves low-conductor signals
- Simple, intuitive menu with 99-Tone option
Cons
- Single-frequency lacks the iron-separation edge of SMF in the worst ground
- Stock 11″ coil can be overwhelmed in heavy trash; no smaller coil included
Verdict: If you want a waterproof, turn-on-and-go detector that will find lead musket balls and brass buttons in moderate iron, the Simplex Ultra is the best value under $300. For beginners, it's forgiving; for experienced hunters, the All-Metal mode is a quick way to scan a site.
Perfect for: Beginners and budget-minded hunters who want waterproofing and simplicity.
#9 Fisher F22 — Best Under $250 for Relic Hunting
The Fisher F22 is the most battle-tested budget detector on the market, with a long track record of use in the field. Its low 7.69 kHz frequency favors large conductive targets like brass, and the FeTone adjustable iron audio is a feature rarely seen below $250. The Artifact mode and Custom notches let you keep low-conductor lead and brass in while rejecting iron.
Specs / Features
- Single frequency 7.69 kHz; 4 modes: Jewelry, Coin, Artifact, Custom
- 9-segment visual + 0–99 numeric Target ID; 4-tone audio
- FeTone adjustable iron audio; notch discrimination; 10 sensitivity levels
- Weatherproof (IP54, not submersible); preset ground balance; 2.3 lbs; 2x AA (~25–30 hr)
- 5-year warranty; made in USA
Pros
- FeTone iron audio gives control over iron response at a bargain price
- Artifact mode and Custom notch keep low-conductor lead/brass
- Lightweight, 25–30 hour battery life, 5-year warranty
- Battle-tested, huge user community
Cons
- No manual ground balance — performance drops in mineralized soil
- Weatherproof only, not submersible
- 9″ coil may struggle in heavy iron compared to DD designs
Verdict: The F22 is the best ultra-budget option for relic hunters who mostly detect in mild soil fields, parks, and old yards. Its low frequency hits brass hard, and FeTone lets you hear iron while still catching non-ferrous. If your ground is hot or trashy, step up to the X-Terra Pro.
Perfect for: Casual hunters and beginners on a strict budget who need iron audio and a reliable machine.
Comparison Table
| Detector | Best For | Frequency / Modes | Target ID | Waterproof | Coil(s) Included | Weight | Link |
|---|---|---|---|---|---|---|---|
| Nokta Legend 2 | Overall relic hunting | SMF + 5 single (4–40 kHz), Relic mode | 99-point | IP68, 5 m | 11″ DD + 8″×5.5″ DD | 2.6 lbs | Check Price |
| Minelab Manticore | Deep brass/large relics | Multi-IQ+ (SMF), 10 modes | 2D map, −19–99 | IP68, 5 m | M11 11″ DD | 2.9 lbs | Check Price |
| XP Deus II | Extreme iron, lightweight | FMF (SMF) + 49 single (4–45 kHz) | VDI freq-dependent | IP68, 20 m | 11″ FMF (others optional) | ~750 g–1.65 lb | Check Price |
| Minelab Equinox 900 | All-around value | Multi-IQ (SMF) + 6 single | 119-segment | IP68, 5 m | 11″ + 6″ DD | 2.8 lbs | Check Price |
| Garrett AT Max | Mid-range single-frequency | 13.6 kHz VLF, True All Metal | 0–99 (44 seg) | Submersible 10 ft | 8.5″×11″ DD | 3.03 lbs | Check Price |
| Garrett ACE Apex | Budget multi-frequency | Multi-Flex (5–20 kHz + Multi) | 0–99 | Weatherproof | 6″×11″ DD Viper | 2.5 lbs | Check Price |
| Minelab X-Terra Pro | Budget relic specialist | 5/8/10/15 kHz switchable | 30-seg | IP68, 5 m | 12″×9″ DD | 2.9 lbs | Check Price |
| Nokta Simplex Ultra | Budget waterproof all-round | 15 kHz single | 01–99 | IP68, 5 m | 11″ DD | 2.6 lbs | Check Price |
| Fisher F22 | Under $250 relic | 7.69 kHz single, 4 modes | 0–99 | Weatherproof | 9″ concentric | 2.3 lbs | Check Price |
Which Metal Detector Should You Buy?
If you're new to relic hunting and want the best overall package: The Nokta Legend 2 gives you SMF, a dedicated Relic mode, and two coils — including the sniper that makes iron-side lead possible. It's the safest recommendation for most buyers.
If you hunt deep brass and large relics in mineralized soil: The Minelab Manticore's Multi-IQ+ engine and 2D Target ID map will pay for itself. Its depth on high conductors is unmatched, and the visual target signature helps you skip iron falses.
If you want the lightest, most configurable detector for extreme iron: The XP Deus II. Fast recovery, 49 single frequencies, and a 20 m waterproof rating make it the ultimate relic tool for serious hunters.
If you want a proven do-everything machine with two coils: The Minelab Equinox 900. It handles beach, field, and park, and the 6″ coil is superb for trashy cellar holes.
If you're on a budget and mostly hunt fields and parks: The Minelab X-Terra Pro is the best waterproof budget switchable-frequency option. Its 5 kHz mode hits brass hard, and 15 kHz handles small lead. If you want multi-frequency on a budget, the Garrett ACE Apex is the choice.
If your budget is under $250: The Fisher F22. It's not the deepest or most waterproof, but FeTone iron audio and Artifact mode give you relic-specific control that used to cost much more. For a few dollars more, the Nokta Simplex Ultra adds waterproofing and a carbon shaft.
For more guidance on choosing a detector, see our best metal detectors for jewelry hunting guide for low-conductor targets and our depth by soil type guide to understand how your ground affects real depth.
Frequently Asked Questions
Q: What target ID do lead musket balls and brass buttons show?
Lead and brass are low-to-mid conductors. On Minelab Field mode scales, large lead musket balls typically ring ~19, minie balls high teens, and brass buttons mid-teens. A round corner CS buckle can read 30–31. These numbers are illustrative and shift with soil, depth, and machine — always dig by tone as well as VDI.
Q: Can I use discrimination if I'm hunting lead and brass?
Yes, but be careful. Lead and brass ring in the same low-conductor range as foil and pull tabs. If you notch out those segments, you'll also reject lead and brass. Use iron audio or small notches to reject iron only, and run All-Metal or a wide-open discrimination in high-trash relic sites.
Q: How deep can a metal detector find a lead bullet or brass button?
Realistic depth for coin-sized and bullet-sized targets on a mid-range detector in average soil is 6–10 inches. Large brass buckle or belt hardware can be found at 12–14″ with the right machine and low frequency. Depth drops 30–50% in mineralized or iron-infested ground — see our depth guide for specifics.
Q: Do I need a simultaneous multi-frequency detector for lead and brass?
Not strictly. SMF machines (Legend, Manticore, Equinox, Deus II, Apex) see the full conductivity spectrum in one sweep, so you don't have to choose between deep brass and small lead. Single-frequency machines require you to pick a frequency based on your target: low (5 kHz) for depth on large brass, high (15–20 kHz) for small lead. SMF is more versatile in mixed sites.
Q: Is a pinpointer necessary for relic hunting?
Absolutely. Once you've dug a hole, a pinpointer saves you minutes per target and helps you retrieve small lead and brass without scratching them. The Garrett Pro-Pointer AT is the classic choice; the XP MI-6 pairs wirelessly with Deus II. For budget hunters, any reliable pinpointer works.
Q: Are pulse induction (PI) detectors good for lead and brass relics?
No. PI machines excel in extreme mineralization and on raw gold, but they provide little to no discrimination — you'll dig every nail and piece of iron. VLF and SMF detectors with iron audio and discrimination are the right tool for relic hunting lead and brass.
Conclusion
Lead and brass relics demand a detector that respects low-conductor targets and handles iron intelligently. The picks above range from budget-friendly picks like the Fisher F22 to premium options like the Manticore, but every one of them can find musket balls, buttons, and buckles when set up correctly. The biggest mistake relic hunters make is over-discriminating and not using iron audio — by hearing the nails and digging the low tones, you unlock the old sites that others walk past.
Our top recommendation for most people remains the Nokta Legend 2: simultaneous multi-frequency, a dedicated Relic mode, and a sniper coil included. If you have the budget and want maximum depth on large brass, the Minelab Manticore is the premium pick; if weight and iron separation are your obsession, the XP Deus II is unmatched. For budget hunters, the Minelab X-Terra Pro and Nokta Simplex Ultra deliver surprising performance at entry-level prices.
For more on how to read what your detector tells you, revisit our target ID and discrimination guide. If you're chasing low-conductor jewelry or trying to understand depth in different soils, our jewelry hunting guide and depth by soil type guide will help you get the most from any machine.
